Since the birth of liquid crystal display, its light and thin, health and energy saving, and many other advantages, won the majority of consumer groups like and favor. But the LCD display delicate and easily damaged, resulting in many users at a loss in the use and maintenance process. In order to let you know more about the maintenance of LCD knowledge, small series through the data collection, to provide a few experience, we hope to give you some help.
(1) water
Water can be said to be the first "natural enemies of liquid crystal". We should have had such experience, if the mobile phone or electronic meter LCD screen or in a very large humidity environment, the display of digital images will become blurred or even see. It can be seen that the destructive power of water vapor to liquid crystal screen is amazing. So we should put LCD in a relatively dry environment, keep moisture into the interior of LCD.
(2) dust
Liquid crystal easy to dye dust. For a long time into a face, together with the nature. If it is found that the display surface stains, usable dip in with soft cloth slightly less water gently will wipe it. Don't take water directly onto the display surface, the water into the LCD will lead to screen short-circuit.
(3) fire
The fire here refers to the high pressure of the liquid crystal display. Do not attempt to remove or change the LCD display, even though the LCD has been closed for a long time, the CFL converter in the background lighting components is still possible with a high pressure of about 1000V, for the human body, this is definitely a dangerous value.
(4) collision
LCD screen is very fragile, in a dramatic move or vibrate, possible damage to the screen quality and display the internal liquid crystal molecules, the display effect is greatly reduced. In addition, to avoid a strong impact and vibration, LCD contains a lot of glass and sensitive electrical components, fell to the floor or other similar to a strong blow will cause damage to the screen or other units.
(5) touch
The more "noble" things are "fragile", and LCD is no exception. If you touched her finger to a LCD, screen will produce a circle of ripples, which is common phenomenon, LCD, direct touch LCD is very easy to cause the damage to the small LCD on the line and device, occur most often is the so-called "dead pixels".
(6) Guan
Rational use and effective maintenance of the LCD's service life is essential. Many people are easy to figure, often after the shutdown will not at the same time, the display will be turned off, which will seriously damage the life of the display. In general, do not make LCD long time in the boot state (continuous 72 hours or more). LCD in the display of the image is also a feature, is that if the continuous time to display a fixed content, some LCD pixels will overheat and thus cause damage, which should also be caused attention. For example, nothing will turn off the monitor, pay attention to the operation of the screen saver or just let it show all white screen content, don't let the brightness of the display is too high. This is an easy task. To prolong the service life of the liquid crystal display.
If you are now a user of LCD monitor, you want to see this small article can get some help, if you have more experience in the use of LCD technology, also welcome to introduce the experience in the forum to give more